The straw dryer is applied for drying barley straw, oat straw, wheat straw, rye straw, straw, sorghum straw, corn straw, potato vines, beanstalks ( including materials like soybean straw, broad bean straw, pea straw, cowpea straw, lupine straw, peanut vine, etc.). According to the characteristic, production capacity, applying requirement, cost control, operating convenience of each biomass material, our company optimizes the drying technology. Recommended products: three-layer rotary drum dryer, patent number: ZL2009 2 0089749.2.
This equipment is of a huge production, high efficiency, and energy-saving, small floor space. Compared with common dryer machines, it saves energy by 30%-50%, thus saving energy and drying cost to the maximum.
Straw rotary dryer is consists of a heating device, feeding device, transport device, discharge device, dust extraction device, and other connecting parts. Material to be dried enters the rotary drum dryer, and as the rotary drum dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the rotary drum dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the rotary drum dryer, passing through the hot gas stream as it falls.
Working principle of crops straw rotary dryer:
Crops straw rotary dryer is consists of a heating device, feeding device, transport device, discharge device, dust extraction device and other connecting parts. For the installation process, the rotary drum dryer should slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the rotary drum dryer under gravity. Material to be dried enters the rotary drum dryer, and as the rotary drum dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the rotary drum dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the rotary drum dryer, passing through the hot gas stream as it falls.
Model | Input (t/h) | Output (t/h) | Evaporation Capacity (t/h) | Initial Moisture (%) | Final Moisture (%) | Total Power (kw) | Total Weight (kg) | Plant Area (m²) |
DLSG1409 | 1.53 | 1.08 | 0.45 | 40±5% | 15% (Adjustable) | 34 | 22000 | 5m*15m |
DLSG1615 | 2.89 | 2.03 | 0.85 | 45 | 28000 | 6m*22m | ||
DLSG2008/3 | 5.2 | 3.67 | 1.53 | 78 | 40000 | 8m*16m | ||
DLSG2010/3 | 6.63 | 4.68 | 1.95 | 90 | 45000 | 8m*18m | ||
DLSG2210/3 | 7.24 | 5.11 | 2.13 | 105 | 50000 | 8m*20m | ||
DLSG2510/3 | 8.91 | 6.29 | 2.62 | 125 | 60000 | 10m*20m | ||
DLSG2512/3 | 10.5 | 7.41 | 3.09 | 140 | 68000 | 10m*24m | ||
DLSG2912/3 | 12.14 | 8.57 | 3.57 | 155 | 76000 | 10m*24m |
1. It can realize intelligent control, one-touch operation, automatic operating parameter control. The dryer stays at the best operating status all the time, thus guaranteeing that the dried material is of stable moisture and bright color.
2. The self-heat preservation heat efficiency of the cylinder reaches up to 70% (the heat efficiency of traditional single drum dryer is only 35%), which improves the heat efficiency by 30% at least.
3. Modularized dust collecting-purifying heat recycles use allocation, safe and environmental.
4. It can be matched with a few new type hot blast stove. Efficient and energy-saving, controllable heat supply, simple operation. The energy consumption decline reaches up to 30 %, power consumption decreases by 20 %, the operating cost is lower.
【Location】: Anhui
【Capacity】: 100t/d
【Location】: guangdong
【Capacity】: 600t/d
【Location】: Belgian
【Capacity】: 5t/h