Single drum rotary dryer as know as single cylinder dryer. It is used in food, feed, fertilizer, chemical, pharmaceutical, mining industries. According to the different requirements about dryer. We have a different heat sources. For example, direct heating model hot blast stove, indirect hot blast stove, heat conduction oil, electric heating, steam, etc. This dryer is suitable for drying the material with moisture less than 65%.
Single drum rotary dryer mainly consists of heater, feeding machine, rotary drum, discharging machine, induced draft fan, unloading feeder, cyclone, odor removal equipment and power distribution cabinet form; wet materials into drying machine, will be uniformly distributed in the drum in the copy board agitator, uniform dispersion and full contact with hot air furnace. Then the wet material will be fully dried.
Automatic control, to ensure the drying of sawdust water even and stable.Automatic stone removing and iron removal can ensure that the impurities of the sawdust are not in the rear process.The required investment of equipment is 1/6 of imported products.
Compared with the single cylinder drier, the utility model reduces the occupation cost by about 50%, reduces the civil investment by about 50%, A variety of material combinations Zhou Xiangyang distribution, effectively control the drying time.
Cylinder self insulation, thermal efficiency of more than 70%, With tail drive, the transmission is more stable and reliable; completely change the wheel rotation, often slip shadow, Sound production phenomenon.
Frequency control is adopted to control material flow, and the final water can be easily controlled according to the needs of users Sub index. The air outlet temperature is low, and the dedusting equipment can be used for a long time.
|Water Evaporation (ton/hour)||0.565||0.792||1.130||1.61||2.20||3.25|
Capacity : 3ton/h
Floor area: 10×40m
Capacity : 1.1 ton/h
Floor area: 10×40m
Capacity : 1 ton/h
Floor area: 10×30m