The raw coal dryer ordered by Shaanxi customers from our company has been installed and officially put into production. It works well and has received good reviews.

The raw coal dryer produced by our company is an industrial equipment specially used for drying and processing raw coal and other materials. It mainly consists of a heat source, a dispersing device, a belt loader, a feeder, a rotary drum, a belt discharge machine, an induced draft fan, an unloader and a power distribution cabinet.

The working principle of the raw coal dryer is to transport the coal slime with large moisture content to the strong hot air dryer for drying, and then send it and the crushed coal gangue or coke foam to the automatic batching mixer with a forklift to add glue and mix. Finally, it is sent to the briquetting machine to be pressed into coal blocks, and finally enters the shaping dryer. The products produced by this equipment have beautiful appearance and adjustable heat generation.

The raw coal dryer has the characteristics of strong overload resistance, large processing capacity, low fuel consumption, and low drying cost. At the same time, it adopts a downstream drying method. The flue gas and wet materials enter the dryer from the same side. The high-temperature flue gas can be used to obtain high evaporation intensity. The dryer outlet temperature is low and the thermal efficiency is high.

Raw coal dryers are widely used in the drying of coal industry materials such as coal slime, raw coal, flotation clean coal, and mixed clean coal; the drying of blast furnace slag, clay, pentonite, limestone, sand, quartz stone and other construction industry materials; various Drying of metal concentrates, waste residues, tailings and other mineral processing industry materials; as well as drying of non-heat-sensitive materials in the chemical industry.

When installing and using the raw coal dryer, you need to pay attention to safety and stability. Corresponding specifications and standards need to be followed during installation to ensure that the equipment is placed firmly, the foundation concrete is flat, and the location is accurate. During use, it is necessary to strengthen the maintenance and upkeep of the equipment, regularly check the operating status of the equipment, detect and deal with faults in a timely manner, and ensure the long-term stable operation of the equipment.

In short, as an important industrial equipment, raw coal dryer has wide application prospects in coal, construction, mineral processing and chemical industries. In the future, with the continuous growth of energy demand and the improvement of environmental protection requirements, the market demand for raw coal dryers will further expand.